ANSYS Fluent Tutorial | CFD Analysis of an Air Heater | Low Reynolds No. Flow, Heat Transfer |Part 2/2


In an Air heater, the inlet air temperature is -20 ℃ and the required outlet temperature is 40 ℃. Find out the heat to be generated by the Heater to obtain the hot air at the outlet.

 What you will learn from this tutorial?
 - Use of Offset option.
- How to set Extrude symmetry in both directions about a plane in ANSYS .
 - Fill option to fill a non-axisymmetric geometry by fill by cavity option In ANSYS.
- How to know the volume of any geometry in ANSYS.
 - How to know the no of elements and nodes in each body in ANSYS
- How to setup Boundary conditions for the air heater model in ANSYS.
 - How to setup Adiabatic Boundary condition in ANSYS
 - How to know the volumetric heat generation rate of the heater in ANSYS .
 - Source Term Modeling in ANSYS Fluent In ANSYS .

 This tutorial is divided into 2 parts for simplicity. This is the Part -2 of the tutorial containing the Geometry Creation and Meshing Procedure.
For Geometry and Meshing Please visit the First part.
 Here is the link Part 1: https://youtu.be/Kw_fVE6-8hE

 You can connect with us on Facebook, Telegram, Instagram, Linked In & Blogger. Please like, share and comment. Subscribe to our channel if have not subscribed yet.
 #ansys #ansysfluent #ansystutorials

Comments